Falcon 210 GEO T DL - Manual (Page 26)

SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
26
Reassembly
LP Gas
Centre burner
Large ring
If you are converting to
LP Gas the burner ring in
the centre burner must be
changed for the large ring
in the conversion kit.
Screw in the hexagon headed venturi but to make
fitting the outer burners easier do not fully tighten yet.
Save the original brass ring with the removed orifices
and bypass screws.
the centre burner
Natural Gas at 20mbar
The 95 jet in burner A is counter-bored and is different to
the non- counter-bored 95 jet in the conversion kit
Burner Burner rings
A 95 39 original ring
B 120 54 original ring
C 165 96 original ring
LP Gas - Butane at 28-30 or Propane at
37mbar
Use the non counter-bored 95 jet in the conversion kit for
burner C
Burner Burner rings
A 64 32 original ring
B 82 40 original ring
C 107 57
Large ring in
conversion kit