GE 2-9753 User Manual
Page 15
13
• Reset the security code by placing the handset in the
base for about 20 seconds.
Dial tone is OK, but
• Make sure the TONE/PULSE switch on the base is
can’t dial out
correctly set (see p. 3).
Handset does not ring
• Make sure the RINGER switch on the handset is
turned to ON.
• You may have too many extension phones on your
line. Try unplugging some phones.
• See solutions for “No dial tone.”
You experience static,
• Change channels.
noise, or fading in
• Is handset out of range? Move closer to the base.
and out
• Does the base need to be relocated?
• Charge battery.
• Make sure base is not plugged into an outlet with
another household appliance.
Unit beeps
• Place handset in base for 20 seconds to reset the
security code. If that doesn’t work, charge battery for
12 hours.
• Clean charging contacts on handset and base with a
soft cloth, or an eraser.
• See solutions for “No dial tone.”
• Replace battery.
Memory Dialing
• Did you program the memory location keys correctly?
See p. 8.
• Did you follow proper dialing sequence? See pp. 8-9.
• Make sure TONE/PULSE switch is correctly set.
See p. 3.
Problem
Solution