Grundig E10 - Manual (Page 13)

11
7 CLOCK AND TIMER FEATURES continued
ton. Within 5 seconds of finishing, press the A or
B button once or just wait until the timer digits
stop flashing.
TIMER SET METHOD 2 – NUMERIC KEYPAD:
1. Turn the radio off. The timer digits (38) appear in
the upper right corner of the display.
2. Press and hold down TIMER A or B button for
about two seconds. The timer digits flash in the
display.
3. Use the numeric keypad to key-in the wake up
time in 24 hour format. Within 5 seconds of
finishing, press the A or B button once or just
wait until the timer digits stop flashing.
TIMER SET METHOD 3 – TUNING KNOB
1. Turn the radio off. The timer digits (38) appear in
the upper right corner of the display.
2. Press and hold down TIMER A or B button for
about two seconds. The timer digits flash in the
display.
3. Within 5 seconds, press/release the Up/Hour
button, then use the tuning knob to set the hour.
4. Within 5 seconds, press/release the Down/Min
button, then use the tuning knob to set the
minutes.
5. Within 5 seconds of finishing, press/release the
TIMER A or B button that’s being worked with or
wait until the timer digits stop flashing.
STORING A RADIO STATION INTO TIMER
MEMORY
To hear a radio station when the timer activates, the
station must be stored into timer memory. Here’s
the 3 step procedure:
1. Turn on the E10 and tune to the desired station.
2. Press/Release the MEMORY button.
3. Press/Release the TIMER A or TIMER B button.
The timer symbol flashes in the display twice.
NOTE: To monitor the frequencies stored into timer
memory A and B, perform a three second press of the
SYSTEM SET button while the radio is turned off. The
set code information and the
frequencies stored into timer memory flash in the
display.
ACTIVATING/DEACTIVATING THE TIMER
For a timer to turn on the radio, it must be activated.
A timer can be activated/deactivated with the radio
on or off. To activate the timer, press/release the
TIMER A or TIMER B button. The timer symbol will
appear in the display. To deactivate a timer, press/
release the TIMER A or TIMER B button. The timer
symbol will disappear from the display.
USING THE SNOOZE FEATURE
When the timer activates and turns the radio on, the
timer activation symbol (39) appears flashing in the
display. While it is flashing, press/release the
SNOOZE/LIGHT button (7). The radio will turn off and
then turn on again in 10 minutes. This process can be
repeated 3 times.
E10 OWNER’S MANUAL E10 OWNER’S MANUAL