Grundig E10 - Manual (Page 16)

14
9 SYSTEM SET CODES
CODE NUMBER FUNCTION
00 (factory default setting)
20
25
50
09
10
12
24
22
28
29
76
87 (factory default setting)
IN DISPLAY
E10 OWNER’S MANUAL
System Set Codes allow the radio to be tailored to your needs by changing certain programmable functions.
These functions and their descriptions are noted in the table.
SYSTEM SET CODE TABLE
Divide the memories into 10 pages with
50 locations
Divide the memories into 20 pages with
25 locations
Divide the memories into 25 pages with
20 locations
Divide the memories into 50 pages with
10 locations
Set the tuning steps for MW (AM) to
9KHz
Set the tuning steps for MW (AM) to
10KHz
Set the clock system to 12 Hr format
Set the clock system to 24 Hr format
Check all the segments on LCD display
Rechargeable battery to be used
Normal AA battery to be used
Set the FM frequency range to
76-108MHz (for Japan)
Set the FM frequency range to
87-108MHz (N. America/Europe)
10:50
20:25
25:20
50:10
9kHz
10kHz
12H
24H
Ni-MH
76 108
87 108