GE QS24 UR User Manual
Page 32
Advertising
QS–28
UR SWITCH MODULE – QUICKSTART GUIDE
QUICKSTART GUIDE
Z
Locate and click on the Ethernet card (it will have TCPIP Protocol
as part of its name).
The Ethernet card is typically referred to as an Ethernet adaptor.
Z
Select “Use the following IP address”.
Z
Enter a unique IP address (from 3.94.247.001 to 3.94.247.254 if
using our test network address range).
Z
Enter the subnet mask which, if using our test network, will be
255.255.252.0.).
Z
Plug into the switch and ensure that the link LED comes on.
Z
Select OK, then OK again to exit the LOCAL AREA NETWORK
PROPERTIES menu.
Z
Advertising