Control panel, Heating element, Porcelain oven interior – GE JRS0624 User Manual

Page 14: Control panel heating element, Care and cleaning of the oven

Advertising
background image

14

Care and cleaning of the oven.

Control Panel

It’s a good idea to wipe the control panel
after each use. Clean with mild soap and
water or vinegar and water, rinse with
clean water and polish dry with a soft
cloth.

Do not use abrasive cleansers, strong
liquid cleansers, plastic scouring pads or
oven cleansers on the control panel—they
will damage the finish. A 50/50 solution
of vinegar and hot water works well.

Oven Heating Elements

Do not clean the bake element or the broil
element. Any soil will burn off when the
elements are heated.

To clean the oven floor, gently lift the
bake element. Clean with warm soapy
water.

Porcelain Oven Interior

With proper care, the porcelain enamel
finish on the inside of the oven—top,
bottom, sides, back and inside of the
door—will stay new-looking for years.

Let the oven cool before cleaning. We
recommend that you wear rubber gloves
when cleaning the oven.

Soap and water will normally do the
job. Heavy spattering or spillovers may
require cleaning with a mild abrasive
cleaner. Soap-filled scouring pads
may also be used.

Do not allow food spills with a high sugar or acid
content (such as tomatoes, sauerkraut, fruit juices
or pie filling) to remain on the surface. They may
cause a dull spot even after cleaning.

Household ammonia may make the
cleaning job easier. Place 1/2 cup in
a shallow glass or pottery container in
a cold oven overnight. The ammonia
fumes will help loosen the burned-on
grease and food.

If necessary, you may use an oven cleaner.
Follow the package directions.

Do not spray oven cleaner on the electrical
controls and switches because it could cause a
short circuit and result in sparking or fire.

Do not allow a film from the cleaner to build up
on the temperature sensor—it could cause the
oven to heat improperly. (The sensor is located
at the top of the oven.) Carefully wipe the
sensor clean after each oven cleaning, being
careful not to move the sensor as a change in
its position could affect how the oven bakes.

Do not spray any oven cleaner on the oven
door, handles or any exterior surface of the
oven, cabinets or painted surfaces. The cleaner
can damage these surfaces.

Safety Instructions

Operating Instructions

Care and Cleaning

Tr

oubleshooting T

ips

Consumer Support

Advertising