Connecting to a cable or dsl modem or to an – Gateway and 6000 Series User Manual
Page 18
Advertising
CHAPTER 2: Checking Out Your Gateway Notebook
www.gateway.com
14
2
Insert the other end of the modem cable into a telephone wall jack. The
modem will not work with digital or PBX telephone lines.
3
Start your notebook, then start your communications program.
Connecting to a cable or DSL modem or to an Ethernet
network
Your notebook has a network jack that you can use to connect to a cable or DSL
modem or to an Ethernet network.
To connect to a cable or DSL modem or to an Ethernet network:
1
Insert one end of the network cable into the network jack
on the right
side of your notebook.
2
Insert the other end of the network cable into a cable modem, DSL
modem, or Ethernet network jack.
Advertising