Gateway and 6000 Series User Manual

Page 41

Advertising
background image

Replacing the DVD drive

www.gateway.com

37

9

Insert a straightened paper clip into the DVD drive’s manual eject hole,
push in the paper clip to eject the drive tray, then pull the drive tray open.

10

Carefully slide the drive out of the drive bay.

11

Slide the new DVD drive into the drive bay. Make sure that the drive fits
securely in the bay.

12

Secure the DVD drive with the screw removed in

Step 8

.

13

Replace the memory bay cover, then tighten the five captive screws.

14

Replace the removable and keyboard screws.

15

Insert the battery, then turn your notebook over.

16

Connect the power adapter, modem cable, and network cable, then turn
on your notebook.

Advertising
This manual is related to the following products: