Gateway and 6000 Series - Manual (Page 37)

Adding or replacing memory www.gateway.com
33
4 Disconnect all peripheral devices and remove any PC cards.
5 Turn your notebook over so the bottom is facing up, then remove the
battery. For more information, see
“Changing batteries” on page 27 .
Tips & Tricks
The screw hole is marked with a K .
6 Remove the keyboard and removable screws shown in the following
picture, loosen the remaining five captive screws (these screws cannot be
removed), then remove the memory bay cover.
Captive
screw Removable
screw
Keyboard
screw
Captive
screw Captive
screw
Captive
screw
Captive
screw