Getting started, Assembly – GE R30 User Manual

Page 2

Advertising
background image

See back for troubleshooting

Congratulations on the purchase of
the Recessed Light Extender. Once
installed, you can provide directed light
to specific areas around your house.

Getting Started…

The 45155 Recessed
Light Extender model
requires a

“R30” size

light bulb. You can use
an incandescent, CFL or
LED light bulb. Do not use
a halogen light bulb.

The Recessed Light Extender is very simple to assemble
and even easier to install.

The Recessed Light Extender consists of two parts –
1.
Light Assembly (ratchet screw base, rocker/swivel
mount and securing collar)
2. Cover Ring (alignment pin holes, snap clip holes)

Assembly

1. Remove the Recessed Light Extender Assembly and
Cover Ring from packaging. Take note of the alignment
pins and snap clips on securing collar.

2. Position the Recessed
Light Extender screw base
through the cover ring hole.
Position the Alignment pins
to the alignment hole on
the cover ring

.

3. Firmly push the cover ring
onto the securing collar snap
clips until each clip snaps
into place.

No tools
required

Includes universal
cover ring that
fits all recessed
lighting fixtures up
to 8” openings

UP TO

8”

Advertising
This manual is related to the following products: