GoVideo DDV2001 - Manual (Page 14)

8 Dual-Deck VCR User’s Guide
FRONT P
ANEL DISPLA
Y
1 D E C K 1 S T A T U S I N D I C A T O R
Lights to show you that Deck 1 is
active. Also, graphically displays the
status of the tape in Deck 1; e.g.,
Stop, Play, Rewind, etc.
2 T V / V C R I N D I C A T O R
Lights when the Dual-Deck is in VCR
mode, turns off when the Dual-Deck
is in TV mode, as set by the TV/VCR
key.
3 T I M E R I N D I C A T O R
Lights to show you that a Timer
Recording has been programmed
and stored in memory. Blinks if
there is a Timer Recording error.
4 C O P Y I N D I C A T O R
Lights to show you that a tape is
being copied.
5 D E C K 2 S T A T U S I N D I C A T O R
Lights to show you that Deck 2 is
active. Also, graphically displays the
status of the tape in Deck 2; e.g.,
Stop, Play, Rewind, etc.
6 D E C K 1 P L A Y / R E C O R D
S P E E D
Shows you the current playback (SP,
LP, or SLP) or record speed (SP or
SLP) for Deck 1.
7 C L O C K / T A P E C O U N T E R
Shows you the current time, the
tape counter position, or the time
remaining until the end of the tape
in the active deck, as set by the
CLK/CTR key. Also briefly displays
the status of the active deck when
you press a deck control key; e.g.,
STOP
, PLAY , REWIND ,
etc.
8 A M / P M I N D I C A T O R
Lights when the time is A.M., turns
off when the time is P.M.
9 D E C K 2 P L A Y / R E C O R D
S P E E D
Shows you the current playback (SP,
LP, or SLP) or record speed (SP or
SLP) for Deck 2.
The following is an overview of the front panel
display.
DECK 1
S L P S L P
DECK 2 VCR
AM
TIMER COPY
1 2 3 4 5
6 7 8 9