GoVideo DDV2001 - Manual (Page 21)

15 5 - Record
RECORD SETTINGS
1 O P E N M A I N M E N U
Press MENU.
2 S E L E C T “ R E C O R D / E D I T S E T T I N G S ”
Press 3.
3 A D J U S T R E C O R D / E D I T S E T T I N G S
Press 1, 2, 3, 4, 5, or 6 to set the following:
1 - D u a l R e c o r d i n g
Sequential – Tapes will record in sequence;
i.e., the VCR will record over the entire tape
in Deck 1, then over the tape in Deck 2, and
then stop.
Loop – Tapes will record in a continuous
loop; i.e., the VCR will record over the entire
tape in Deck 1, then over the tape in Deck 2,
then Deck 1, etc. until you press STOP
on
the recording deck.
Normal – Each deck will record indepen-
dently (default setting).
2 - D a t e / T i m e S t a m p
Timer – The date, time, and record source
will be “stamped” (superimposed) briefly at
the start of all timer recordings.
Cont. – The date, time, and record source will
be stamped continuously over all recordings.
All – The date, time, and record source will
be stamped briefly at the start of all record-
ings.
Off – The Date/Time Stamp will be off.
3 - D e c k 1 R e c o r d S o u r c e
Auto is the recommended setting, because the
VCR will automatically record whatever is visible
on the TV screen when you press REC. You may
also fix the Record Source to Aux (the front A/V
inputs), Deck 2, or Tuner (the current television
show).
4 - D e c k 2 R e c o r d S o u r c e
Auto is recommended for this setting as well.
You can also fix the Deck 2 record source to
Aux, Deck 1, or Tuner.
5 - 8 - S c e n e E d i t L i s t
Please refer to page 19.
6 - S e t u p T i t l e r M e s s a g e
Please refer to page 22.
Follow these steps to set the default
Record Settings for your Dual-Deck VCR.
for Deck 2 Rec Source 4
press
press 3
MAIN MENU
1 Copy Settings
2 Playback Settings
3 Record/Edit Settings
4 Channel Settings
5 VCR Settings
6 Timer Recording
7 Language/Langue
/ = Move = Sel MENU = Quit
RECORD/EDIT SETTINGS
1 Dual Recording Off
2 Date/Time Stamp Timer
3 Deck 1 Rec Source Auto
4 Deck 2 Rec Source Auto
5 8-Scene Edit List
6 Setup Titler Message
/ = Move = Sel MENU = Quit
press 1 for Dual Recording
2 for Date/Time Stamp
3 for Deck 1 Rec Source
5 for 8-Scene Edit List
6 for Setup Titler Message
MENU
N O T E S
• If you set Dual Recording to “Sequential”
and set the Record Speed to SLP, you can
record for 12 hours with two T-120 tapes.
• If Date/Time Stamp is set to “Cont.,” the
On-Screen Display and menu system will
be disabled. Press STOP
on the
recording deck to restore normal on-
screen functions.