GoVideo DDV2001 - Manual (Page 49)

43 Appendix C - Help
SYMPTOM SOLUTION(S)
Cannot record from cable box. • Set VCR to cable box output channel 2, 3 or 4, then
select desired channel on cable box.
Cannot Timer Record. • Set clock to correct time; see page 37.
Copy speeds do not match. • Turn Speed Matching on; see page 11.
Tape ejects during copy or record. • Place piece of tape over record safety tab opening.
VCR automatically plays/rewinds. • To turn Auto Play/Rewind off; see page 13.
• Turn EZ-Copy off; see page 11.
8-Scene Edit List not working. • Insert source tape in Deck 1.
• 8-Scene Edit List is unavailable while copying a tape.
Cannot eject tapes with remote. • Turn on Remote Eject in menu system; see page 40.
• Remote Eject is unavailable if scenes are pro-
grammed in 8-Scene Edit List. Clear scenes from
Edit List or press STOP
on front panel to erase
scenes automatically.
Cannot reset Deck 1 tape counter. • Deck 1 counter reset is unavailable if scenes are
programmed in 8-Scene Edit List. Clear scenes from
Edit List or press STOP
on front panel to erase
scenes automatically.
Tape counters not moving. • To display tape counters, the VCR requires control
track, which is only present on precorded tapes.
No menus or On-Screen Displays. • Tape may be blank (“snow” appears on screen). If so,
menus and On-Screen Displays cannot be shown.
Stop tape or record on tape to enable displays.
• Remote may be set to control TV and not VCR. Press
VCR key to reactivate it.
• Date/Time Stamp may be set to “Cont” (Continu-
ous) with recording in progress. Press STOP on
recording deck to restore normal on-screen func-
tions; see page 15.
TV shows blue screen. • If current channel is too weak to display clear
picture, VCR will display blue screen. To show weak
channels, see page 39.
• Double-check antenna connections or tuner set-
tings.
Front panel display blinking. • VCR is in Auto Power Off mode. If you press POWER
while rewinding, copying, Timer Recording, One-
Touch Recording or EZ-Copying, VCR will automati-
cally turn off when the given function is complete.
• Press POWER to toggle Auto Power on and off.
Copy blinking on front panel display. • Indicates deck is paused while copying tape.