Installation instructions reversing the door swing, Caution – GE 12 User Manual

Page 10

Advertising
background image

TRANSFER TOP HINGE TO
THE LEFT

Using a putty knife with the edge covered with
masking tape, remove the plug buttons. Be careful
of the paint finish.

Reinstall the plug button on the right side by
inserting it into the holes vacated by the top hinge
screws.

Reassemble the top hinge and shim on the left side,
turning the screws just enough to hold the hinge
in place.

3

Installation Instructions

REVERSING THE DOOR SWING

(CONT.)

REMOVE THE FRESH FOOD DOOR

Tape the door shut with masking tape.

Remove the center hinge and shim by removing
the screws (some models have lock washers with
each screw). Lift up the hinge to remove it.

NOTE:

Some models have a washer between the

center hinge and the top of the fresh food door.
Do not lose.

Remove the tape holding the door shut.

Lift the fresh food door up and off the bottom
hinge.

Set the door outside-up on a non-scratching surface.
Make sure the butter bin does not swing open.

NOTE:

When removing the door, watch for

washer(s) between the bottom hinge and the
bottom of the fresh food door that may stick to
the door. Do not lose.

CAUTION:

Do not let door drop

to the floor. To do so could damage the door stop.

2

10

Advertising