Graco Inc. 1095 HI - Manual (Page 28)

Pressure Control Board
28 311365G
Pressure Control Transducer
Removal
Relieve pressure; page 9. Wait 5 minutes
before servicing.
1. Remove four screws (38) and cover (96).
2. Disconnect transducer connector (E) from
motor control board (95).
3. Disconnect potentiometer connector (C)
from motor control board.
4. Remove four screws (39) and control box
(61). Allow control panel (68) to hang down
freely.
5. Remove grommet (40) from control box
then remove transducer (86) and o-ring
(20) from filter base (67).
6. Remove grommet (40) from transducer and
save for reuse.
38
96
ti13493a
E
95
ti12999a
C ti12997a
ti7458a
39
61
68
ti13494a
67
86
20
ti7260a
40
ti13495a
40
ti13495a