Miller Electric Syncrowave 200 - Manual (Page 3)

3
Runner ® Package
Syncrowave ® 200 Runner
#907 308-01-1 208 – 230 V, 50/60 Hz
#907 309-01-1 460/575 VAC, 50/60 Hz
Includes Syncrowave 200, No. 39 running
gear, 150 amp WP1712SFDI Weldcraft
torch with quick-connect, 12 ft (3.7 m)
work cable with clamp and quick-connect,
electrode holder with quick-connect,
RFCS-14 remote foot control with 20 ft
(6 m) cord, gas regulator and gas hose.
Primary cord is included with 208 – 230 V
model only.
Remote Controls
RFCS-14 HD
Foot Control
#194 744
For all Miller
solid-state
power sources
after serial
number JK674521. This new design
increases stability with a larger base and
durability with a heavier cord. Maximum
flexibility is accomplished with a recon-
figurable cord that can exit the front, back or
either side of the pedal. Foot pedal provides
remote current and contactor control.
Includes 20 ft (6 m) cord and 14-pin plug.
RCCS-14 Remote Contactor and Current
Control #043 688 14-pin plug
For all Miller solid-state power sources
after serial number JK674521. North/south
rotary-motion fingertip control fastens to
TIG torch using two Velcro
® straps. Great
for applications that require a finer amperage
control. Includes 26.5 ft (8 m) control cord.
RCC-14 Remote Contactor and Current
Control #151 086 14-pin plug
For all Miller solid-state power sources
after serial number JK674521. Side-to-side
(east/west) rotary-motion fingertip control
fastens to TIG torch using two Velcro
®
straps. Great for production or contractors
that need quick ramp-up. Includes 26.5 ft
(8 m) control cord.
RMLS-14 Switch #129 337
For all Miller solid-state power sources
after serial number JK674521. Momentary-
and maintained-contact rocker switch for
contactor control. Push forward for
maintained contact and backward for
momentary contact. Includes 26.5 ft (8 m)
cord and 14-pin plug.
RMS-14 On/Off Control #187 208
For all Miller solid-state power sources
after serial number JK674521. Momentary-
contact switch for contactor control.
Rubber-covered pushbutton dome switch
ideal for repetitive on-off applications.
Includes 26.5 ft (8 m) cord and 14-pin plug.
RHC-14 Hand Control
#129 340
Miniature hand control
for remote current and
contactor control.
Dimensions:
4 x 4 x 3-1/4 in (102 x 102 x 82 mm).
Includes 20 ft (6 m) cord and 14-pin plug.
Water Coolant Systems
For more information, see the Miller Coolant
Systems literature sheet, Index No. AY/7.2.
Coolmate ™ 3 #043 007 115 VAC
For use with water-cooled torches rated up
to 500 amps. Unique paddle-wheel
indicator, external filter and easy-fill spout.
Low-Conductivity Coolant #043 810
Sold in cases of four 1-gallon recyclable
plastic bottles. Miller coolants contain a
base of ethylene glycol and deionized water
to protect against freezing to -37˚F (-38˚C)
or boiling to 227˚F (108˚C). Also contains a
compound that resists algae growth.
Running Gear and Covers
No. 39 Running Gear #300 009
Includes low cylinder rack, two 8 in
(203 mm) wheels and two 4 in (102 mm)
casters. Two compartments have been
integrated for filler materials and will
accommodate one gas cylinder up to
60 in (152 cm) high measuring 9 in
(23 cm) in diameter.
Protective Cover #300 059
Heavy-duty, water- and mildew-resistant.
Protects and maintains the finish of
the welder.
TIG (GTAW) Torches
Weldcraft ® TIG Torches
The Weldcraft line of TIG
torches complements the
most popular TIG power
source line available today. The Weldcraft
torch line includes both air-cooled and
water-cooled models. Available with
genuine Weldcraft parts.
Water-Cooled Torch #WP2025RM
Requires adapter #195 380.
Water-Cooled TIG Torch Adapter
#195 380
TIG (Gas Tungsten Arc Welding) Handbook
#170 555
To order, call the Miller Literature
Distribution Center at 1-920-751-2120, or
FAX 1-920-751-2121. A comprehensive,
text on all aspects of the TIG process.
Genuine Miller Accessories