Miller Electric S-32S - Manual

Simple to use but with all the features needed for
heavy-duty wire feed applications... that’s the S-32S
and S-32SL wire feeders from Miller. Built with the
strength and flexibility to handle the strenuous work
loads of field and fabrication shops, the S-32S and
S-32SL delivers proven reliability and performance.
These feeders operate off arc voltage, so a control
cord is not required. Operates with most CV and CC
DC-type power sources.
The S-32S and S-32SL handle the necessary high-
end speed for small diameter wires, and the low-
end speed and power for the more demanding larger
diameter wires.
Applications
Structural steel
Building construction
Bridge construction
Field maintenance and repair
Outdoor equipment repair and build-up work
(Use with CC/CV,
DC Power Sources.)
® Certified by Canadian Standards Association to both Canadian and U.S. Standards.
NRTL/C
Index No. M/6.21
Issued Dec. 1999 S-32S and S-32SL
Voltage-Sensing Wire Feeders
Processes
Flux Cored (FCAW) Welding
(Gas and Self-shielded)
MIG (GMAW)
Welding
Features Benefits
Operates on open-circuit and arc voltages
Voltage-sensing control circuit with
CC/CV switch
S-32S wire speed range:
50 – 700 IPM (1.3 – 18 m/min)
S-32SL wire speed range:
25 – 325 IPM (0.6 – 8.2 m/min)
Polarity insensitive
High-torque, 24 VDC drive motor with two
gear-driven drive rolls
Solid-state speed control and brake circuit
Overload protection
Quick-change drive rolls and quick connect
for Miller guns
Insulated gun-holding bracket
Requires only the secondary weld cable to power feeder, no control cord needed.
Allows the feeder to be used with most constant-current and constant-voltage DC power sources.
Accommodates a wide variety of wire sizes and types, .023 – 5/64 in (0.6 – 2.0 mm).
Designed for 5/64– 7/64 in (2.0 – 2.8 mm) diameter wire.
Operates on straight (electrode negative) or reverse (electrode positive) polarity.
Offers excellent wire feeding performance and long uninterrupted service life.
Exceptional speed control and regulation; eliminates the need for electrical/mechanical relays and increases service life.
Protects motor and control circuit against possible damage due to overloading conditions.
No tools required. Easy attachment.
Convenient place for holding gun when not welding or when transporting the feeder.
Miller Electric Mfg. Co.
An Illinois Tool Works Company
1635 West Spencer Street
Appleton, WI 54914 USA
Web Site
www.MillerWelds.com
International Headquarters
Phone: 920-735-4505
USA FAX: 920-735-4134
Canadian FAX: 920-735-4169
International FAX: 920-735-4125
Ordering Information
☞
See back page.
Specifications
(Subject to change without notice.) Heavy Industrial
Model
S-32S
S-S32SL*
Input Power
Operates on open-circuit
voltage and arc voltage
15 to 100 V
Electrode Wire
Diameter Capacity
.023 – 5⁄64 in (0.6 – 2.0 mm)
5⁄64 – 7⁄64 in (2.0 – 2.8 mm)
Maximum Spool Size
Capacity
60 lb (27 kg) coil
Wire Feed Speed**
50 –700 IPM (1.3 –18 m/min)
25 – 325 IPM (0.6 – 8.2 m/min)
Net
Weight
33 lb (15 kg)
Dimensions
L: 221⁄2 in (572 mm)
W: 103⁄4 in (273 mm)
H: 10 in (254 mm)
*When using an 8 in (203 mm) diameter spool of welding wire, compression spring #057 745 is required. **Actual range is dependent on arc voltage applied.