Marantz PMD910 - Manual (Page 42)

ENGLISH
38
Hints on installation
We want you to enjoy using this unit for years to come, so
please bear in mind the following points when choosing a
suitable location for it:
Do...
Use in a well-ventilated room.
Place on a solid, flat, level surface, such as a table, shelf
or stereo rack.
Don’t...
Use in a place exposed to high temperatures or humidity,
including near radiators and other heat-generating
appliances.
Place on a window sill or other place where the player will
be exposed to direct sunlight.
Use in an excessively dusty or damp environment.
Place directly on top of an amplifier, or other component in
your stereo system that becomes hot in use.
Use near a television or monitor as you may experience
interference-especially if the television uses an indoor
antenna.
Use in a kitchen or other room where the player may be
exposed to smoke or steam.
Use on a thick rug or carpet, or cover with cloth-this may
prevent proper cooling of the unit.
Place on an unstable surface, or one that is not large
enough to support all four of the unit’s feet.
Moving the player
If you need to move the player, first press POWER button on
the front panel to turn the player off, then the unplug the power
cord. Never lift or move the unit during playback-discs rotate
at a high speed and may be damaged.
Power cord caution
Handle the power cord by the plug part. Do not pull out the
plug by tugging the cord, and never touch the power cord
when your hands are wet, as this could cause a short circuit or
electric shock. Do not place the unit, a piece of furniture, or
other object on the power cord or pinch the cord in any other
way. Never make a knot in the cord or tie it with other cords.
The power cords should be routed so that they are not likely to
be stepped on. A damaged power cord can cause a fire or give
you an electric shock. Check the power cord once in a while. If
you find it damaged, ask your nearest MARANTZ authorized
service center or your dealer for a replacement.
Resetting the player
Resetting the player returns setup menu to their factory
defaults. To reset the player, press and hold
(FR) and
(NEXT) on the front panel simultaneously.
Malfunctioning of this unit
Static electricity or other external influences may cause
malfunctioning of this unit. In this case,
1. Press the power button on the front panel till power is
turned off .
2. unplug the power cord and then plug back in.
This will usually reset the unit for proper operation. If this does
not correct the problem, please consult your nearest
MARANTZ service center.