Motorola SB5102 - Manual (Page 11)

SB5102 Cable Modem User Guide 4
Introduction Before You Begin Installation & Configuration FAQ Troubleshooting Glossary License
Before You Begin
Before you begin the installation, check that you received the following items with your
SB5102 cable modem:
You will need 75-ohm coaxial cable with F-type connectors to connect your cable
modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may
need a 5-900 MHz RF
splitter and a total of three coaxial cables to connect both the TV
and the cable modem. The coaxial cable and RF splitter are available at consumer
electronic stores.
Item Description
AC connector Connects the SB5102 cable modem to the AC
electrical outlet
10/100Base-T
Ethernet cable Connects to the Ethernet port