Motorola SB5102 User Manual
Page 19
SB5102 Cable Modem User Guide
12
Configuring TCP/IP in Windows 98,
Windows 98 SE, or Windows Me
1
On the Windows Desktop, click Start.
2
Select Settings and then Control Panel from the pop-up menus.
3
Double-click the Network icon on the Control Panel window.
4
Select the Configuration tab on the Network window.
5
Verify that TCP/IP is installed for the adapter that will be used to connect to the
SB5102 cable modem. If TCP/IP is installed, then skip to step 10. If TCP/IP is not
installed for the adapter, continue with step 6.
To access an electronic version of this guide please visit:
http://broadband.motorola.com/consumers/support
Although your SB5102 cable modem model number may be
different than in the images in this guide, the procedure is the
same.