Precautions – Motorola SB5102 User Manual
Page 12
SB5102 Cable Modem User Guide
5
Precautions
Postpone cable modem installation until there is no risk of thunderstorm or lightning
activity in the area.
To avoid damaging the cable modem with static electricity:
•
Always first connect the coaxial cable to the grounded cable TV wall outlet.
•
Before you connect or disconnect the Ethernet cable from your cable modem or PC,
always touch the coaxial cable connector on the cable modem to release any static
charges.
The SB5102 cable modem must be installed in a vertical position.
To prevent overheating the cable modem, do not block the ventilation holes on its sides.
Do not open the cable modem. Refer all service to your cable service provider.
Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar
chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.
This product is for indoor use only. Do not route the Ethernet cable outside of
the building. Exposure of the cables to lightning could create a safety hazard
and damage the product.
Always make the wall
connection first.
To avoid damaging your cable
modem or PC with static electricity:
Before you connect or disconnect the
Ethernet cable, always touch the coaxial
cable connector on the cable modem.