Motorola ME4067 Series - Manual (Page 16)

29
H
an
d
se
t
S
et
ti
n
g
s
30
H
an
d
se
t
S
et
ti
n
g
s
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the HS NAME submenu.
Press the
key.
Enter/Change the name of the handset (e.g. MOBIL 1).
1.
2.
3.
4.
5.
6. Press the key to confirm the input.
Note: To enter the characters, press the relevant key the corresponding number of
times, 1, 2, 3 or 4 times, according to the position on the key . Press the 5 key
three times for an L, for example.
It is possible to assign a name to each handset. This name is then displayed when
the phone is in Standby mode.
Entering/Changing Handset Name
It is possible to save prefix numbers in the handset. This number is then recalled after
pressing the 0 key for two seconds.
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the PREFIX MEM submenu.
Press the
key.
Enter the prefix number (e.g. access code of the subscriber you call most
frequently).
Press the key to confirm the input.
Saving a Prefix
1.
2.
3.
4.
5.
6.
Switching the Key Tone On/Off
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the KEY TONE submenu.
Press the
key.
Press the or key to select the setting.
Press the
key to confirm the setting.
1.
2.
3.
4.
5.
6.
Automatic Call Answering
The automatic call answering function (auto answer on) enables an incoming call to be
taken immediately when the handset is lifted from the base station (or charger unit)
without pressing the or button.
Press the key as often as necessary until the HANDSET menu appears.
Press the
key.
Press the or key to select the AUTO ANS submenu.
Press the
key.
Use the or key to switch automatic call answering on or off.
Press the
key to confirm the setting.
1.
2.
3.
4.
5.
6.