Motorola ME4067 Series - Manual (Page 17)

31
Handset Settings
32
Handset Settings
The handsets can be reset to the default settings. In doing so, all the settings which
you have changed are returned to their DEFAULT values. The phone book entries will
not be affected.
Restore Default Settings
Press the key until the HANDSET menu appears.
Press the
key .
1.
2.
The duration of each call is displayed. You can switch this function on and off.
Call T imer
Press the key as often as necessary until the HANDSET menu appears.
Press the
key .
Press the or key to select the CALL TIMER submenu.
Press the
key .
Use the or key to switch the call timer on or off.
Press the
key to confirm the setting.
1.
2.
3.
4.
5.
6.
Note: The handset is reset to its DEFAULT settings.
Press the or key to select the DEFAULT submenu.
Press the
key .
Press the key to confirm the setting.
3.
4.
5.
On the handset you wish to register, press the key as often as necessary until
the HANDSET menu appears.
Press the
key .
Press the or key to select the REGISTER submenu.
Press the
key .
Press and hold the key on the base station for 2-3 seconds, then enter the PIN
when requested. (Default setting = 0000)
Press the
key .
1.
2.
3.
4.
5.
6.
Note: After the connection has been established, the name and number of the handset
(the next available number if less than 4 are already registered ) appear in the display
Further handsets can be registered on the base station. They must support the GAP
standard. Please note, it is possible that some of the handset functions will not
be available.
Registering Additional Handsets
Default Settings
External Ringer Melody = Melody 1
Internal Ringer Melody = Melody 2
VIP Ringer Melody = selectable when you store a new number
Ringer Volume Level 3
Receiver Volume Level 3
External Call Ring On/Off ON
Internal Call Ring On/Off ON