MITSUBISHI ELECTRIC PD-6130 - Manual (Page 25)

16
VIDEO Settings Menu
Adjusting the picture
The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
1. On the MAIN MENU, select “VIDEO SETTINGS”,
then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the ▲ and ▼ buttons to select “CONTRAST”.
VIDEO SETTINGS 1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
: NORMAL
: OFF
SEL. RETURN ADJ.
3. Use the ᮤ and ᮣ buttons to adjust the contrast.
CONTRAST
* If neither the ᮤ or ᮣ button is pressed within 5 seconds,
the current setting is stored into memory and the previous
screen reappears.
Note: If “CAN NOT ADJUST” appears ...
When trying to enter the VIDEO SETTINGS submenu,
make sure PICTURE MODE is not set to DEFAULT.
Information
Ⅵ Video settings screen
CONTRAST .... Changes the picture’s white level.
BRIGHTNESS .. Changes the picture’s black level.
SHARPNESS .. Changes the picture’s sharpness.
Adjusts picture detail of VIDEO
display.
COLOR ........... Changes the color density.
TINT ................ Changes the picture’s tint. Adjust for
natural colored skin, background, etc.
Ⅵ Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Ⅵ Restoring the factory default settings
Select “DEFAULT” under the “PICTURE MODE”
settings.
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the “THEAT. 1” mode
1. On the MAIN MENU, select “VIDEO SETTINGS”,
then press the MENU/ENTER button.
The “VIDEO SETTINGS” screen appears.
2. Use the ▲ and ▼ buttons to select “PICTURE MODE”.
VIDEO SETTINGS 1 / 2
EXIT
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
: NORMAL
: OFF
SEL. RETURN ADJ.
3. To set to “THEAT. 1” ...
Use the ᮤ and ᮣ buttons to select “THEAT. 1”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
→ BRIGHT ↔ NORMAL ↔ THEAT. 1 ↔ THEAT. 2 ↔ DEFAULT ←
PICTURE MODE : THEAT. 1
* If neither the ᮤ or ᮣ button is pressed within 5 seconds,
the current selection is stored into memory and the
previous screen reappears.
Information
Ⅵ Types of picture modes
THEAT. 1, 2 ...... Select this mode when watching video
in a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT. 2.
NORMAL ......... Select this mode when watching video
in a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
BRIGHT ........... This mode provides brighter pictures
than NORMAL.
DEFAULT......... Use this to reset the picture to the
factory default settings.