MITSUBISHI ELECTRIC PD-6130 - Manual (Page 39)

30
Option3 Settings Menu
Using the timer
This function sets the monitor to turn ON/OFF
automatically at a set time.
1. On the MAIN MENU, select “OPTION3”, then press
the MENU/ENTER button.
The “OPTION3” screen appears.
2. Use the
▲ and ▼ buttons to select “TIMER”, then press
the MENU/ENTER button.
The “TIMER” screen appears.
TIMER
EXIT
PRESENT TIME
PROGRAM : OFF
SEL. RETURN MENU/ENTER OK
3. Set the TIMER using ▲▼ ᮤ and ᮣ buttons.
See below to set PRESENT TIME.
See page 31 to set PROGRAM.
Information
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults.
PRESENT TIME
This sets the day of the week and present time.
Example: Setting “WEDNESDAY”, “22:05”
Perform Steps 1-2 of Using the timer, then...
3. Use the ▲ and ▼ buttons to select “PRESENT TIME”,
then press the MENU/ENTER button.
The “PRESENT TIME” screen appears.
EXIT SEL. RETURN
PRESENT TIME
WEDNESDAY
13 : 00 : 00
RETURN
DAYLIGHT
SAVING TIME : OFF
ADJ.
4. Use the ▲ and ▼ buttons to select the item, then adjust
using the ᮤ and ᮣ buttons.
EXIT SEL. RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00
RETURN
DAYLIGHT
SAVING TIME : OFF
ADJ.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
• DAYLIGHT SAVING TIME
ON ↔ OFF
• Day
→SUNDAY ↔ MONDAY ↔ ..... ↔ FRIDAY ↔ SATURDAY←
• Hour/Minutes
→ 00:00 ↔ 00:01 ↔ 00:02 ↔ ..... ↔ 23:58 ↔ 23:59←
5. Once the setting is completed...
Use the ▲ and ▼ buttons to select “SET”, then press
the MENU/ENTER button.
6. The adjustments are stored. Press the “EXIT” button to
return to the TIMER menu.
EXIT SEL. RETURN
PRESENT TIME
WEDNESDAY
22 : 05 : 00
: OFF
MENU/ENTER OK
RETURN
DAYLIGHT
SAVING TIME
SET
Information
Ⅵ PRESENT TIME settings
DAYLIGHT SAVING TIME
........................ Use to set DAYLIGHT SAVING
TIME.
ON: The present time + 1 hour.
OFF: Cancelled
Day ................ Set the day of the week (e.g. Sunday).
Hour .............. Set the hour in the 24-hour format
(range 00 to 23).
Minutes ......... Set the minutes (range 00 to 59).
* If you press the EXIT button instead of the MENU/
ENTER button in step 5, the settings will not be saved.