MITSUBISHI ELECTRIC PD-6130 - Manual (Page 30)

21
2. Use the ▲ and ▼ buttons to select “MENU”, then press
the MENU/ENTER button.
The “MENU” menu appears.
3. Use the ▲ and ▼ buttons to select “DISPLAY MENU”.
4. To set the DISPLAY MENU to “OFF”...
Use the ᮤ and ᮣ buttons to select “OFF”.
The mode switches as follows each time the ᮤ or ᮣ
button is pressed:
ON ↔ OFF
MENU
EXIT
: OFF
: 1
: OFF
SEL. RETURN ADJ.
DISPLAY MENU
MENU ADJUST
MENU ORBITER
Information
Ⅵ DISPLAY MENU settings
ON ............ The on-screen menu appears.
OFF .......... The on-screen menu does not appear.
If you press the INFO button on the remote control for
more than 3 seconds the main menu will appear and
can be set (although it is not ON).
Ⅵ MENU ADJUST settings
Adjusts the screen position of the menu.
The position can be set between 1 to 6.
Ⅵ MENU ORBITER settings
ON ........ The position of the menu will be shifted by
eight dots each time it is displayed.
OFF ...... The on-screen menu (OSM) will be
displayed at the same position.
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults except for AUTO PICTURE.
Information
Ⅵ When “AUTO PICTURE” is “OFF”
MONITOR SETTINGS
EXIT
ASPECT MODE
V-POSITION
H-POSITION
V-HEIGHT
H-WIDTH
AUTO PICTURE
FINE PICTURE
PICTURE ADJ.
: STANDARD
: OFF
SEL. RETURN ADJ.
When Auto Picture is off, the Fine Picture and the
Picture ADJ. items are displayed so that you can adjust
them.
Ⅵ Adjusting the Auto Picture
ON ................... The Picture ADJ., Fine Picture and
Position adjustments are made
automatically.
Not available for digital ZOOM.
OFF ................. The Picture ADJ., Fine Picture and
Position adjustments are made
manually.
* If FINE PICTURE can’t be adjusted, set AUTO
PICTURE to OFF and adjust manually.
Ⅵ Adjusting the position of the image
V-POSITION ... Adjusts the vertical position of the
image.
H-POSITION ... Adjusts the horizontal position of the
image.
V-HEIGHT ....... Adjusts the vertical size of the image.
(Except for STRETCH mode)
H-WIDTH ......... Adjusts the horizontal size of the
image. (Except for STRETCH mode)
FINE PICTURE* .. Adjusts for flickering.
PICTURE ADJ.* ... Adjusts for striped patterns on the
image.
* The PICTURE ADJ. and FINE PICTURE features are
available only when the AUTO PICTURE is off.
* The AUTO PICTURE, FINE PICTURE and PICTURE
ADJ. are available only for RGB signals.
These features are not available for moving pictures on
VIDEO, HD/DVD or RGB.
Ⅵ Restoring the factory default settings
Select “ALL RESET” under the OPTION1 menu. Note
that this also restores other settings to the factory
defaults except for Auto Picture.
Option1 Settings Menu
Setting the on-screen menu
This sets the position of the menu, the display format
(horizontal or vertical) etc.
Example: Turning the DISPLAY MENU off
1. On the MAIN MENU, select “OPTION1”, then press
the MENU/ENTER button.
The “OPTION1” menu appears.