Mustek PP3000 - Manual (Page 12)

1 - 2
TM
CHAP. 1
GENER…
FEATURES
•
Dot matrix 9 pin printer head
•
Bi-directional printing
•
Friction type paper feed with optional sprocket paper feed
•
40 columns for 15.4cpi
•
Accepts paper width 2.25/3/3.25 inches with adjustable paper guide (3.5
inches paper width for sprocket option)
•
Print on ordinary paper or up to 3-fold carbonless copy paper
•
DC 24V powered
•
Selectable parallel or serial (RS232C) interface
∗
Change from serial to parallel: change jumper settings; interface cable.
∗
Change from parallel to serial: modification by manufacturer required.
•
Optional serial interface of RS422
•
4 character sets supported: USA & Europe, IBM character set #1, IBM
character set #2, Japan
•
Versatile print function as inverted character printing and underlining set by
software print commands
•
About 4KB max. input buffer available enabling simultaneous printing and
data receiving
•
Peripheral unit drive circuit enables control with short circuit protection of
external devices such as Cash Drawer
•
Hardware/software hand shaking in serial interface through DIP switch
selection
•
Manual paper cut mechanism
•
Validation printing function
•
Dimension: friction type: 273mm(l) x 125mm(w) x 174mm(h)
sprocket type: 400mm(l) x 155mm(w) x 180mm(h)
•
Epson command emulation model also available