Codes, Function, Detail description – Mustek PP3000 User Manual
Page 59: Application limit
A - 3
TM
APP. A
STAR …
CODES
(HEX/CONTROL) : 0C / <FF>
FUNCTION :
Page feed (form feed)
DETAIL DESCRIPTION :
After data in the line buffer is printed out,
feeds the paper to the top of the next page.
CODES
(HEX/CONTROL) : 0D / <CR>
FUNCTION :
Line feed (Same as LF)
APPLICATION LIMIT :
When DIP SW 1-3 of parallel interfaced
printer or DIP SW 3 - 3 of serial interfaced printer is set to ON, this code
becomes invalid (which is the default).
DETAIL DESCRIPTION :
Functions the same as an LF code.
CODES
(HEX/CONTROL) : 0E / <SO>
FUNCTION :
Select expanded character mode
DETAIL DESCRIPTION :
Data following this code is printed in
double-width characters.
CODES
(HEX/CONTROL) : 0F / <SI>
FUNCTION :
Select inverted print mode
APPLICATION LIMIT :
This code is valid only when input at the
beginning of a line, thus, normal and inverted characters cannot be mixed in the
same line.
DETAIL DESCRIPTION :
Data following this code is printed out in
inverted characters (up side down and right to left).