Mustek PP3000 - Manual (Page 49)

6 - 1
TM
CHAP. 6
MAINT…
MAINTENANCE
CAUTION:
Do not open the top cover and touch the print head immediately after
printing, because the print head may be very hot.
CLEANING
•
To clean the dust, paper particles, or dirt on and in the printer:
Use a vacuum cleaner to clean thoroughly.
Remove any pieces of paper from the paper path.
•
To wipe off stains:
Use a clean soft dry cloth to wipe off stains.
If the stains can not be wiped off using the dry cloth, use a neutral
detergent.
CAUTION:
To avoid damaging the printer, do not use benzene, benzine, alcohol, thinner,
trichloroethylene, or ketone-based solvents on the printer’s plastic and
rubber components.
PAPER JAM
•
Turn off the printer.
•
Open the top cover after the print head cools down.
•
Cut the paper roll from the paper guide with a pair of scissors.
•
Turn the printer power back to on.
•
Press the FEED switch to forward the paper out of the paper guide. Engage
mechanical help like tweezers or manual pull if necessary.