Milan Technology MIL-S24002TGXX - Manual (Page 4)

1
1. Introduction
The 24-port 10/100/1000 TX plus 2 combo SFP Slots Switch is an ideal solution for solving
traffic block at the core of the network. It offers 24 x auto-negotiating 10/100/1000Base-T
Gigabit Ethernet ports that can significantly improve your network backbone performance.
This Switch will fit into any enterprise level network to act as an exit to the backbone switch.
It also provides 2 SFP Gigabit port for gigabit network connection.
The 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch features Auto MDI/MDIX
function for each port. [In general, MDI means connecting to another Hub or Switch while
MDIX means connecting to a workstation or PC. Therefore, Auto MDI/MDIX means that you
can connect to another Switch or workstation without changing non-crossover or crossover
cabling. The switch also features a store-and-forward switching and can auto-learn and
store source address on a 8K MAC address table.
Features
Compatible with IEEE 802.3 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3z
gigabit fiber and IEEE802.3ab 1000Base-T
24 ports gigabit switch with two COMBO SFP SLOTS
Automatic MDIX for all ports
8K entry MAC address table
9K Jumbo Frame support
2Mbits Memory buffer
IEEE802.3x flow control:
Pause frame for 10/100/1000Mbps full duplex
Backpressure for 10/100 Mbps half duplex
2 COMBO SFP SLOTS for SFP transceiver
Store-and-Forward architecture support
One DC fan for good ventilation and to increase system heat sink performance
19 inch Rack mount design