Led indicators – Milan Technology MIL-S24002TGXX User Manual
Page 7
4
The 3-pronged power plug, on/off switch, and Ventilation fan are located at the rear Panel
of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch as shown in Figure 2-2. The
Switch will work with AC in the range 100-240V AC, 50-60Hz.
Figure 2-2. Rear panel of the 24-port 10/100/1000 TX plus 2 Combo SFP Slots Switch
LED Indicators
The LED Indicators gives a real-time indication of system operating statuses. There are 3
LED-indicators (1000, LNK/ACT, FDX/COL) for each Gigabit port and one Power LED for
unit.
The following table provides descriptions of LEDs status and their meaning.
Figure 2-3.LED Indicators
LED
Status
Description
Green
Power On
Power
Off
Power is not connected
Green
The port is operating at the speed of 1000Mbps.
1000
Off
No device attached or in 10/100Mbps mode
Green
The port is connecting with the device.
Blinking
The port is receiving or transmitting data.
LNK/ACT
Off
No device attached.
FDX/COL
Orange
The port is operating in Full-duplex mode.