Wave/vector submenu – Marshall electronic V-R171X-DLW User Manual
Page 26
26
Wave/Vector Submenu
Use the Wave/Vector submenu to change the location of the Waveform Monitor and Vectorscope, as well as the data
displayed on the Waveform monitor or the Vectorscope on the V-R171X-DLW monitor. The Waveform Monitor can
also be customized to conform to different scales, to display different colors, differentiate data with Limits. The
Vectorscope targets can also be changed in this menu.
■
Waveform Mode
This option allows you to choose between different layouts for the Waveform monitor. Available options are YUV
Parade, YUV Overlay, RGB Parade and RGB Overlay.
• YUV Parade
The Y (Luminance, shown in white), U and V (Chrominance components, U is showed in cyan
and V is shown in Magenta) components of the signal are displayed from left to right.
• YUV Overlay
The YUV components of the signal are overlaid.