MACKIE Firewire OPtion Card fot Onyx Mixer - Manual (Page 36)

36
ONYX FireWire Card
ONYX Fir
eWir
e Car
d Appendix B: Technical Info
Onyx FireWire Card Specifications
Mic In to FireWire Card to DAW, routed back to FireWire Card to Control
Room Output; all signal path gain stages set to unity
Frequency Response
+0, –3 dB, 10 Hz to 42 kHz @ 96 kHz sample rate
+0, –1 dB, 10 Hz to 20 kHz @ 44.1 kHz sample rate
Distortion (THD+N)
< 0.025%, 10 Hz to 40 kHz, +4 dBu input @ 96 kHz sample rate
< 0.015%, 20 Hz to 20 kHz, +4 dBu input @ 96 kHz sample rate
< 0.010%, 20 Hz to 20 kHz, +4 dBu input @ 44.1 kHz sample rate
Dynamic Range
> 98 dB, 20 Hz to 20 kHz @ 96 kHz sample rate
> 100 dB, 20 Hz to 20 kHz @ 44.1 kHz sample rate
Main Mix Trim
+10 dB to –10 dB, unity detent
Dimensions
Height: 1.3 in/32 mm
Width: 8.8 in/222 mm
Depth: 3.6 in/91 mm
Weight: 8.3 oz./235 g
LOUD Technologies Inc. is always striving to improve our products by
incorporating new and improved materials, components, and manufacturing
methods. Therefore, we reserve the right to change these specifications at
any time without notice.
“Mackie.”, “Onyx,” and the “Running Man” are registered trademarks of
LOUD Technologies Inc. All other brand names mentioned are trademarks or
registered trademarks of their respective holders, and are hereby acknowl-
edged.
©2004-2012 LOUD Technologies Inc. All Rights Reserved.
R