Getting started, Onyx fir ewir e car d, For the pc – MACKIE Firewire OPtion Card fot Onyx Mixer User Manual
Page 8
8
ONYX FireWire Card
ONYX Fir
eWir
e Car
d
Getting Started
For the PC:
When connecting the Onyx FireWire card to a PC, it is necessary to first install
the drivers and the control panel. The control panel allows you to set the sample
rate and adjust the latency (delay) of the audio passing through the FireWire card.
Do not connect the FireWire card to your computer yet! We’ll tell
you when it’s time to do that.
Installing the Drivers and Control Panel
Note: Check our website (http://www.mackie.com/OnyxFW_Update) to see if there
are newer Drivers available for the Onyx FireWire card.
1.
Insert the CD provided with the Onyx FireWire card into your CD drive.
2.
Click "Start > Run > Browse" and navigate to the CD drive. Open the "Control
Panel" folder and double-click “Setup.exe.”
3.
Click "OK" in the Run window. The Mackie Onyx FireWire Driver Setup win-
dow opens. Click "Next" to continue or "Cancel" to close the setup program.