Microtek CX4 - Manual (Page 3)

Safety Instructions
Three symbols as below shown will be used throughout the manual to remind you
when to operate or repair this projector:
Attention: Extra tips or useful indications
Caution: Steps against damages to your equipment
Warning: Steps to avoid personal injury
The following are Safety Instructions that should be followed strictly when setting
up and utilizing the projector:
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not place your projector onto an unsteady trolley, stand or table.
6.
Do not operate your projector nearby a water or heat source.
7.
Only apply accessories or attachments as recommended by this manual.
8.
Use the exact type of power as labeled on the projector. If you are not sure
of the type, you may confirm it from your dealer or local electric company.
9.
Plug in properly the three-pin earthen plug into an earthen socket. If you
have a two-pin earthen plug, contact your dealer or electrical technician for a
replacement. Do not touch the plug with wet hands.
10. Failure to take the following precautions may result in sparks or fire:
Ensure the plug is free of dust before inserting it into a socket.
Insert the plug into the socket securely.
2