Marantz DV4500 - Manual (Page 13)

– 13 – EN
Connection to an audio system
Stereo system
NOTES:
• When using Dolby Digital or DTS decoder, set “DOLBY DIGITAL” or “DTS” to “ON” accordingly for audio output in the setup
mode (Refer to page 24). Set it to “OFF” for the decoder that is not used currently. Playing a DVD using incorrect settings
may generate noise distortion, and may also damage the speakers.
• The audio source on a disc in Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or
DAT deck.
• Set “DOLBY DIGITAL” or “DTS” to “OFF” for audio output in the setup mode for method 1 only. Playing a DVD using incorrect
settings may generate noise distortion, and may also damage the speakers. (Refer to page 24.)
AUDIO
DVD
Audio Input Jacks
Digital Audio Input
Jacks
Analog Audio Out Digital Audio Out
• Method 1 DVD Player + Stereo system
• Method 2 DVD Player + Dolby Digital decoder or DTS decoder
Dolby Digital decoder or
DTS decoder
Method 1 Method 2
CONNECTIONS
The following show examples of connections commonly used to connect the DVD player to TV and other com-
ponents.
If using this DVD player to playback a DVD in a Dolby Digital 5.1 channel surround or DTS surround format, the
DVD player outputs a Dolby Digital or DTS data stream from its OPTICAL or COAXIAL DIGITAL AUDIO OUT
jacks. By hooking the player up to a Dolby Digital or DTS decoder, you can enjoy more convincing, realistic
ambience with powerful and high-quality surround sound of a professional standard which can be heard in
movie theaters. Use an audio coaxial or optical digital cable (not included) for the audio connections.
NOTES:
• Be sure to turn off the power to all components in the system before connecting another component.
• Refer to the Instruction Manuals for your TV, stereo system and any other components to be connected to the
DVD player.
Optical cable (not supplied)
• Optical cable (not supplied) may be damaged when bent at sharp angles. Ensure cables are coiled in loops with a diame-
ter of 15 cm or more when storing them.
• Use a cable which is 3m or shorter.
• Insert cable plugs firmly into the connectors when making connections.
• If a plug has minor scratches or is dirty, clean it with a soft cloth before inserting it into a connector.
English
E59M0UD.qx3 04.6.24 2:34 PM Page 13