Motorola simplefi - Manual (Page 21)

SECTION 3 I N S TA L L AT I O N
SECTION 3, INSTALLATION 7
Follow the step-by-step installation procedure in this section to
ensure you set up your s i m p l e f i, install the wireless adapter, wireless
adapter software, and SimpleWare software correctly. You should be
able to complete the installation procedure in less than 15 minutes.
This section contains the following topics.
• Setting up s i m p l e f i
• Installing SimpleWa re software
• Installing the wireless network
• Discovering your s i m p l e f i
• Activating your Online Guide
Setting Up simplefi
Plug your s i m p l e f i into your home stereo:
1 Place s i m p l e f i near or on top of your stereo receiver and plug
in the AC adapter.
2 Plug one end of the audio signal cable into the RCA jacks on the
back of
s i m p l e f i . Plug the other end of the audio cable into the
c o rresponding left and right RCA jacks on your stereo re c e i v e r.
Use either the CD inputs or the a u x i l i a ry inputs (or other inputs if
these are already in use).
Reset switch AC adapter
RCA jacks Audio signal cable
Figure 3 -1
Connecting simplefi
to your stereo