Motorola simplefi - Manual (Page 97)

4 Click Network ID in the Pro p e rty list and enter a security code
that is appropriate for your wireless network in the Value field.
Click
O K .
Security Codes – Windows 2000
Follow the instructions below to manually configure the security
code, also known as a network ID, of the wireless adapter connected
to your PC. The following dialog boxes describe how to set the
security code for Windows 2000 users.
1 F rom the Windows S t a rt menu, select S e t t i n g s > Network and
Dial-Up Connections .
2 Double-click on the Local Area Connection icon corresponding to
your HomeRF Adapter (not your Ethernet card). You’ll be able to
d i ff e rentiate the two by rolling your mouse over the icon. The
c o rresponding text designates the icon as either HomeRF or
E t h e rnet (the actual text depends on the vendor of your
E t h e rnet adapter).
3 In the Local Area Connection Status dialog box, click P ro p e rt i e s .
APPENDIX E SETTING HOMERF SECURITY C O D E
APPENDIX E, SETTING HOMERF SECURITY CODE 83
Figure E-3