Motorola simplefi - Manual (Page 26)

Installing The Wireless Network Adapter
Windows 98SE, Windows Me, and Windows 2000 support Wireless
USB Network Adapters. The installation procedure and dialog boxes
shown in this section for Windows 98SE are nearly identical to those
for Windows Me and Windows 2000.
The following installation instructions use a Windows feature called
plug-and-play. When you insert your Wireless USB Network Adapter
into a USB port on your PC, Windows displays a series of dialog
boxes to help you install the wireless driver files. If Windows does
not display these dialog boxes, your PC hard w a re may not fully support
plug-and-play. If your PC does not fully support plug-and-play, see
Appendix F, Manual Installation Of Wireless Adapter Software.
The Wireless USB Network Adapter requires a powered USB port.
USB ports, for example, on the back (or front) of your PC are powere d.
However, USB ports on keyboards are normally not powered and do
not work with Wireless USB Network Adapters.
Follow these steps to install driver software on your PC for the
Wireless USB Network Adapter:
NOTE: You might need to insert your Windows operating system
disk during the installation procedure.
1 If you haven’t done so alre a d y, plug your Wi reless USB Network
Adapter into a USB port .
SECTION 3 I N S TA L L ATION
SECTION 3, INSTALLATION 12
Figure 3-8