Miele H 5981 BP - Manual (Page 31)

Speedlight during the heating-
up phase
The SpeedLight illumination is set up ex
works to switch on when the oven is
being operated.
As soon as the oven starts to heat up at
the beginning of a cooking programme,
the SpeedLight illumination lights up
yellow. The rising temperature is shown
by the change in the colour of the light
from yellow via orange to red.
When the required temperature is
reached, the Speedlight turns red. As
soon as the temperature drops below
the set temperature, the colour of the
light changes accordingly.
The SpeedLight illumination can also
be switched off: see "Settings -
Speedlight - In use".
Entering the Duration, a Start
time or Finish time
By entering the Duration, Start time or
Finish time, the cooking process can be
programmed to switch off, or on and
off, automatically.
ß Duration
When entering the Duration, you are
entering the time that the food takes
to cook.
Once this time has elapsed, the oven
heating switches off automatically.
The maximum duration that can be
entered is 12 hours.
The Duration cannot be entered if the
food probe is being used as in this
case the length of the cooking
programme depends on the core
temperature being reached.
ß Start time
By entering the Start time, you
specify the time you want cooking to
start. The oven will switch on
automatically at the time you have
set.
The Start time can only be used in
conjunction with Duration or Finish,
except when using the food probe.
ß Finish
By entering the Finish time, you
specify the time you want cooking to
finish. The oven will switch off
automatically at the time you have
set.
A Finish time cannot be entered if the
food probe is being used as in this
case the end of the cooking
programme depends on the core
temperature being reached.
More about manual operation
31