General alarms, Event alarms, Al ar m s – Motorola T340 User Manual
Page 5: Al arm s, Reminder, General
15
GENERAL Alarms
You can set one GENERAL alarm. This can be set to alert on a daily basis or one-
time only.
• The Standby screen displays with the Alarm
icon
J
.
• When a REMINDER alarm expires, this screen
displays and the pager alerts. Press any button
once to stop the alarm, and again to clear the
message.
• If the alarm is not stopped during activation, the
Alarm icon flashes. Press any button once to
read the message, and press again to clear.
From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL alarms
mode.
H J
9:00 P
9/28
H J
REMINDER
s
H J
9:45 P
9/28
AL
AR
M
S
16
• Press
+
,
then press
*
until
. ,
(the enable
alarm icon) displays. Press
+
to move to the
next field.
• Press
*
until
J
(the enable alert icon)
displays. Press
+
to move to the next field.
• Press
*
to set the hour to the desired value,
then press
+
to move to the Minute field.
• Press
*
to set the minutes to the desired
value. Move to the A.M./P.M., Day and Month
fields by pressing
+
, then press
*
to set the
value for each field.
• Press
)
in any field to set and exit.
Note:
To alert on a daily basis set the Day
and Month to --/--.
• The Standby screen displays with
J
(the enable
alert icon).
H I
9:05
P
9/28
01 . ,
H I
9:05
P
9/28
H J
10:00 A
9/30
H J
9:05
P
9/28
AL
ARM
S
17
Note:
You can temporarily turn off a daily alert (for example, on a weekend).
To turn off the alert, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL alarms
mode.
2. Press
+ +
to move to the alert enable/disable field.
3. Press
*
until
I
(the disable alert icon) displays.
4. Press
)
to set and exit. The
alarm
remains set and turned on, but the
alert
won’t occur until it is turned on again.
• When a GENERAL alarm expires, this screen
displays and the pager alerts.
• Press any button once to stop the alarm, and
again to clear the message.
• If the GENERAL alarm is not stopped during
activation, the ALARM icon flashes.
• Press any button once to read the message,
and press again to clear.
H J
GENERAL
t 1
H J
10:00 A
9/30
AL
AR
M
S
18
To turn on the alert again, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL alarms
mode.
2. Press
+ +
to move to the alert enable/disable field. Press
*
until
J
(the
enable alert icon) displays.
3. Press
)
to set and exit.
To turn off (erase) the alarm settings, follow these steps.
1. From the Standby screen, press and release
*
until
ALARMS?
displays. Press
+
to enter the ALARMS menu. Press
*+
to enter GENERAL alarms
mode.
2. Press
+
,
then press
*
until
--
(the disable alarm icon) displays. Press
)
to set and exit.
EVENT Alarms
You can set up to three EVENT alarms. Each EVENT alarm allows you to keep a
special reminder message that displays when the alarm is activated and the pager
alerts. These can be set to alert either on a daily basis or one-time only.
AL
AR
M
S