MITSUBISHI ELECTRIC FX0N-232ADP - Manual (Page 7)

● Connect 232ADP and a personal computer,and exchange data with the PC.
● Use the communication cable suited to the connector pin
configuration of the personal computer.
(For representative wiring see section 4.)
Personal computer
• Send data
• Receive data
FX 0N series sequencer
• Receive data
• Send data
Receive
Send
Preparation of software
● Use ordinary communication software (terminal
emulator) or dedicated program in the personal
computer.
The communication format of the PC for this example
is as follows.
If the communication format of the software cannot be
adjusted to this setting, adjust the PC and the software
to be the same.
Data length 8 bit
Parity Even
Stop bit 1 bit
Baud rate 2400