MITSUBISHI ELECTRIC FX0N-232ADP - Manual (Page 8)

Sequence program
Power on
X000,ON
RS instruction
drive
Turn on the power of the PC and printer, check the printer is on
line and switch the PC to RUN.
Turn on X000, and drive RS instruction.
Data send
X001,ON
Every time X001 is turned on, the contents of D200 to D210 are
sent to the personal computer, and "test data" is displayed.
Data send
After receiving and storing data from personal computer in D211,
it is output to Y000 to Y017. When input X002 is turned on, the
receive completion flag is reset.
Personal
computer
operation
Operation