6 diagnostics, Diagnostics – MITSUBISHI ELECTRIC FX0N-232ADP User Manual

Page 9

Advertising
background image

DIAGNOSTICS

●

If sending and receiving using these programs is
successful, it is considered that the operation failure
was due to sequence program or communication
protocol error.

●

Program when receiving

* Write the data to be sent to D 0 to D 19 before operating.

●

If not operating normally when using these programs,
eliminate the cause using the flow diagrams shown
following.

●

Set the communication format according
to the external device to be used.

●

If data transfer does not perform correctly when using
the 232ADP, check the operation using the following
programs.

●

Program when sending

[

]

[

]

●

Set the communication format according
to the external device to be used.

●

Header and terminator are not attached.

Receive completion reset

[

[

]

[

]

[

]

[

]

Send request

[

]

[

]

]

Advertising