Meridian America G68 - Manual (Page 18)

I n s t a l l i n g t h e
d i g i t a l s u r r o u n d
c o n t r o l l e r
1 4
To connect the G68D or G68ADV to Meridian DSP loudspeakers
DSP5000 – MAIN R DSP5000 – MAIN L
511 S-patch box
DSP5000C G68D/ADV Digital Surround Controller
DIG OUT COMMS
COMMS
OUTPUT INPUT
DIGITAL INPUTS
2 1
S5 LEAD
S5 LEAD (digital unused)
S5 LEAD
M5 LEAD
DIGITAL
OUTPUT
COMMS
OUTPUT
INPUT
DIGITAL
INPUTS
2
1
DIGITAL
OUTPUT
COMMS
OUTPUT INPUT
DIGITAL INPUTS
2 1
DIGITAL
OUTPUT
• Use the Comms part of an M5 lead to connect one of the
COMMS sockets on the G68 to the digital speaker you have
chosen as the master (typically the centre speaker).
• Use the audio part of the M5 lead to connect the digital speaker
to the appropriate digital output socket.
If the system includes more than two Meridian DSP loudspeakers
you will need a 511 S-patch box (available separately) to link
together the S5 leads from each speaker.
• Connect the COMMS output from the master digital speaker to
one socket on the 511 using an S5 lead.
• Link each pair of speakers together with an S5 lead, out of
the first speaker and into the second speaker, as shown in the
diagram for the main L&R.
• Connect the inputs to the first speaker of each additional pair to
the 511 (Comms) and the appropriate output of the G68 (audio),
using an S5 lead.
The speakers should then be configured appropriately as master
and slaves, and Left, Right, Centre, Surround; see Meridian DSP
Loudspeaker User Guide for more details.
G Series DSP 14 31/10/03, 4:23:57 pm