Meridian America G68 - Manual (Page 45)

C a l i b r a t i n g
t h e s y s t e m
4 1
An 80Hz sinewave will be played through all channels.
You can change the test signal using the menu keys, as described
in the following sections.
To select the channel
• Press Chan.
You can select any individual channel, or All Channels.
To change the sweep rate
• Press A or V to change the sweep rate and direction, as
follows:
Display Description
Chan утф цхъ Exit Sound
CD >> 88.5Hz
Fast sweep up.
Chan утф цхъ Exit Sound
CD > 81.5Hz
Slow sweep up.
Chan утф цхъ Exit Sound
CD Pause 80.0Hz
Paused.
Chan утф цхъ Exit Sound
CD < 78.5Hz
Slow sweep down.
Chan утф цхъ Exit Sound
CD << 70.5Hz
Fast sweep down.
To change the volume
• Use the volume keys in the usual way.
To change the input
• Press Sound.
You can select between the following inputs:
Option Description
Input The current input.
Sine A sinewave.
Noise Pink noise, band bass 500Hz to 2kHz for main
channel.
Silent Silence.
Alternatively you can switch between inputs using the menu keys
on the MSR+.
G Series DSP 41 31/10/03, 4:24:32 pm