Maxtor 1 16 Channel Digital Video Recorder - Manual (Page 11)

11
6.) BACKUP. Image backup mode.(Image back up must be done on playback mode only.)
Locate the playback point of which you want. Press BACKUP, back up menu shows:
USB:
The BACKUP CAUTION window pop-up. Press ENTER to begin data back up. Capacity of USB device is not
limit.
On playback mode, presses BACKUP: Lower-Right corner of the screen:
xxx K (Presently back up progress)
Important:
If DVR cannot detect USB device, please format it to FAT or FAT 32 on PC OS.
When the file is opened from a CF card, only DVR images will appear, but without sounds.
Additional:
During playback, USB device is full or user press BACKUP button screen display a “PAUSE” caption, User
takes out the USB device to computer USB slot then save data to hard disk. After re-insert USB device to
DVR slot, user press BACKUP again. Press ENTER to continue backup or backup button to cancel.
PS: NetViewer software auto copied to USB device when data backup. See the USB Data Read and
Networking pages.
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL. xxx K
PAUSE
** BACKUP CAUTION **
THE ORIGINAL BACKUP FILE
WILL BE KILLED.
PRESS [ENTER] TO BACKUP.
PRESS [BACKUP] TO CANCEL.
BACKUP MENU
CDR WRITE SPEED
START BACKUP TO CDR
FORMAT USB
START BACKUP TO USB
BACKUP MENU
CDR WRITE SPEED x1,x2,x3
START BACKUP TO CDR
BACKUP MENU
FORMAT USB
START BACKUP TO USB
CDRW / USB CDRW USB