Maxtor 1 16 Channel Digital Video Recorder - Manual (Page 32)

32
2) RECORD SPEED: Record FPS setup
-1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5), 10 (8.33),
15(12.5), 30(25), 60(50), 120(100). NTSC / (PAL)
3) RECORD MODE: Record mode setup.
-ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE
4) RECORD AUDIO: Audio record setup
-ON / OFF. (Suggest not fewer than 5 fps.)
5) QUALITY: Record image quality setup
- SUPER / HIGH / FINE / NORMAL / LOW
6) SCHEDULE SETUP
Additional:
2. RECORD SPEED. 1/30(1/30), 1/15(1/15), 1/10(1/10), 1/5 (1/5), 1/3 (1/3), 1/2 (1/2), 1(1), 2(2), 3(3.13), 5(5),
10 (8.33), 15(12.5), 30(25), 60(50), 120(100).
-120 is the maximum fps. Full screen playback with 120 frames per each.
Split screen playback with 60 frames.
3. RECORD MODE. ALWAYS / SCHEDULE / EVENT / EVENT ON SCHEDULE / EVENT + SCHEDULE.
-Always: 24 hours recording.
-Schedule: Date and time schedule recording mode.
-Event: Alarm / Motion / V-Loss event mode recording. (Whatever which channel event, all channel record.)
-Event on schedule: Event record only on schedule time.
-Event + Schedule: Except event on schedule recording, it would still do record if event happens not on
schedule time.
Notice:
After record mode setup, user needs to press REC button to start. Set on Always mode, DVR do record if user
presses REC. Other record mode would ready on DVR idle status.
4. RECORD AUDIO: ON / OFF.
-Choose on, DVR would do audio recording.
Press direction buttons up/down to choose item.
Press values change button to change values.