Maxtor 1 16 Channel Digital Video Recorder - Manual (Page 7)

7
1) Camera Connection
Connect the camera to the CAMERA INPUT
on the Rear Panel of the 16 CH DVR.
2) Monitor Connection (Composite Connection
Method)
Connect the monitor to the MONITOR OUT on
the Rear Panel of the 16 CH DVR.
3) Monitor Connection
Connect S-VIDEO Monitor to MONITOR OUT
on the Rear Panel of the 16 CH DVR.
4) Sensor Connection
Connect the Sensor to the SENSOR INPUT/
OUTPUT on the Rear Panel of the system
13,12,11,10,9,8,7,6,5,4,3,2,1
25,24,23,22,21,20,19,18,17,16,15,14
◆Relay output : COM+NC, COM+NO
◆Alarm input : Short-circuit between Alarm1 ~ 16 and GND is recognized as alarm by default.
Alarm 1 ~ 16 will be corresponding to Camera 1 ~ 16.
NC = Normal Close. NO = Normal Open.
Installation
Procedure
CH1 CH2 CH3 CH4
CH1 CH2 CH3 CH4
MONITOR
VIDEO
LENS
VIDEO
DC
AC24V/DC12
V.P
DC
LEVEL
Rear part of CAMERA
CH1 CH2 CH3 CH4
CH1 CH2 CH3 CH4
MONITOR
VIDEO A
IN OUT
CH1 CH2 CH3 CH4