Metrologic Instruments Stratos MS2x20 Series - Manual (Page 13)

8
S
CALE
C
ONFIGURATION
B
AR
C
ODES
Single or Dual Cable Scale Configuration Bar Codes
Scale Settling Filter Configuration
The following bar codes can be used to configure a Single or
Dual Cable MS2
xx0.
If the MS2 xx0 is currently in a Dual Cable configuration, temporarily
disconnect the Scale to Host cable prior to configuring the scale.
The MS2 xx0 does not need to be in scale service mode.
The Scale Save Data bar code must be scanned last to save the
changed configuration (see page 2).
Scale = Medium Filter
³ 9 9 6 0 0 6
Medium filter setting for moderate vibration
environments.
Scale = Strong Filter
³ 9 9 6 0 0 7
Strong filter setting for high vibration
environments.